ASTM A516/A516M A516 Grade 70 steel plate,A516 Grade 70 steel grade

ASTM A516/A516M A516 Grade 70 steel plate,A516 Grade 70 steel grade

BBN steel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry – this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70.
ASTM A516 Grade 70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels and industrial boilers.
A516 Grade 70 offers greater tensile and yield strength when compared to ASTM A516 Grade 65 and can operate in even lower temperature service.
Our plates come with mill certification in accordance with EN10204 3.1 or EN10204 3.2. Our plates are fully traceable, usually with hard stamping and we welcome any third party or customer inspection if required which can be arranged with the client.
ASTM A516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service.
ASTM A516 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. ASTM A516 grade plates over 40mm in thickness shall be normalized.
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
BBN steel is specialized in supplying ASTM A516 steel plate in A516 grade 70. For more information of A516 grade 70 steel plates, please check them in following:

A516 Grade 70 Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

A516 grade 70

 

 

 

 

 

Thick <12.5mm

0.27

0.13-0.45

0.79-1.30

0.035

0.035

Thick12.5-50mm

0.28

0.13-0.45

0.79-1.30

0.035

0.035

Thick50-100mm

0.30

0.13-0.45

0.79-1.30

0.035

0.035

Thick100-200mm

0.31

0.13-0.45

0.79-1.30

0.035

0.035

Thick>200mm

0.31

0.13-0.45

0.79-1.30

0.035

0.035

Grade

 

A516 Grade 70 Mechanical Property

Thickness

Yield

Tensile

Elongation

A516 grade 70

mm

Min Mpa

Mpa

Min  %

6-40

260

485-620

21%

40-100

260

485-620

17%

More about ASTM A516/A516M A516 Grade 70 steel plate,A516 Grade 70 steel grade,contact [email protected]

ASTM A572 steel plate is used in a variety of structural applications including bridges, buildings, construction equipment, freight cars, machinery, truck parts and transmission towers.

If you need ASTM A572/A572M A572 Grade 50 steel grade,cotnact [email protected]


Kindly send email to [email protected], The professional team will support your work as one-to-one.
At last, Welcome to Visit our mill for long coopeation and checking steel quality in any time.

Henan BEBON international co.,ltd located in zhengzhou ,henan province of china. Since it was established in 2008, Henan BEBON has earned an outstanding reputation for its profession in exporting shipbuilding steel. About the products, we are mainly specialized in steel products for shipbuilding which have been products for shipbuilding which have been approved by some authoritative classification societies,likeLR,BV,ABS,DNV,GL and so on.

If you can`t find what you wanted ,Please send Email to [email protected] ,we will reply you ASAP!!Online Chat

  • p235gh Boiler and Pressure Vessel Steel Plate

    P235GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P235GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • p265gh Boiler and Pressure Vessel Steel Plate

    P265GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P265GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • p355gh Boiler and Pressure Vessel Steel Plate

    P355GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P355GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • s235jr Boiler and Pressure Vessel Steel Plate

    S235JR is a kind of low alloy steel under EN10025 standard. The impact test is at room temperature .S235JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s275j2 Boiler and Pressure Vessel Steel Plate

    S235JR is a kind of low alloy steel under EN10025 standard. The impact test is at room temperature .S235JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s355jr Boiler and Pressure Vessel Steel Plate

    S355JR is a kind of low alloy steel under EN10025 standard. S355JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s235j0W Weather Resistant Steel Plate

    S235J0W is a kind of low alloy steel under EN10025 standard. The impact test temperature is 0 ℃.S235J0W steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s235j2W Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S235J2W. EN10025 S235J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy velue should be carried out in accordance with EN 10025-1.If agreed at the time of the order products of qualities J2 or K2 shall comply with one of the requirements of EN10164.

    Read more
  • s355j0W Weather Resistant Steel Plate

    S355J0W is a kind of low alloy steel under EN10025 standard. The impact test temperature is 0 ℃. S355J0W steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s355j2W Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S355J2W. EN10025 S355J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy value should be carried out in accordance with EN 10025-1.

    Read more
  • a558a Weather Resistant Steel Plate

    A588GrA general 8mm ~ 200mm thick, A588 series high weathering steel bridge structures including A588GrA, A588GrB so on. Such steel by Cu, P, Cr, Ni and other alloying the metal substrate surface to form a protective layer, which has a high resistance to atmospheric corrosion.

    Read more
  • a588b Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S355J2W. EN10025 S355J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy value should be carried out in accordance with EN 10025-1.

    Read more

If you can`t find what you wanted ,Please send Email to [email protected] ,we will reply you ASAP!!Online Chat