LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS Grade A Shipbuilding steel plate

HOME >

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,Grade A steel plate is used for shipbuiling's hull structure and platform. The shipbuilding steel plate grade A is the common tensile strength steel. It has good toughness properties and higher strength, strong corrosion-resistance,the processing properties,and welding properties.ASTM A131 Grade A steel plate  can be used in the manufacture of the ship's hull structure whose weight is below 10000 tons,and usually do navigation around coastal and river area.

Grade A shipbuiling steel plate specification:
Thickness: 4mm to 260mm, 
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.

Grade A steel plate Chemical Composition


Grade

C max

Si max

Mn

P max

S max

Grade A

0.21

0.50

 ≥ 2.5C

0.035

0.035

Note: CE: C+1/6Mn ≤ 0.40%
Cu ≤ 0.35%,Ni ≤ 0.30%≤

Grade A steel plate Mechanical Property


Grade

Rm
(MPa)

Re(MPa) min

A% min

Akv/J min

Grade A

400-520

235

22

E.T °C

Thickness (mm)

20

50

>50-70

>70-100

L

C

L

C

L

C

-

-

34

24

41

27

 Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

Condition Of Delivery


Grade

category

The thickness of steel

≤12

>12.5-25

>25-35

>35-50

>50-100

Grade A

Plate/sheet

A(-)

N(-),TM(-)
CR(50)
AR*(50)

Profile steel

-

Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC,Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .

2.The Figure in the ( ) means the sampling volume to do the impact test, the unit isTon.(-) means without impact test.Contrast in the different standard


ASTM A131M

TOCT 5521

JIS G3106

BS LR

GB712

Grade A

A

SM400A

A

A

Grade A steel plate Available Specification


variety 
Thickness (mm) Width (mm) Longth/ inner diameter (mm)
Shipbuilidng plate cutting edges 6~200 1500~3000 3000~15000
non- cutting edges 1300~3000
Shipbuilidng coil cutting edges 1.2~19 1500~2000 760+20~760-70
non-cutting edges 1510~2010

Grade A steel plate theoretical weight


Thickness (mm) 
theoretical weight Thickness (mm) theoretical weight
Kg/ft2 Kg/m2 Kg/ ft2 Kg/m2
6 4.376 47.10 25 18.962 196.25
7 5.105 54.95 26 20.420 204.10
8 5.834 62.80 28 21.879 219.80
10 7.293 78.50 30 23.337 235.50
11 8.751 86.35 32 25.525 251.20
12 10.21 94.20 34 26.254 266.90
14 10.939 109.90 35 27.713 274.75
16 11.669 125.60 40 29.172 314.00
18 13.127 141.30 45 32.818 353.25
20 14.586 157.00 48 35.006 376.80
22 16.044 172.70 50 36.464 392.50
24 18.232 188.40      

Grade A steel plate dimensional deviation


nominal thickness(mm)
The thickness deviation with following width (mm)
≤1200 >1200~1500 >1500~1800 >1800
>6.0~8.0 ±0.29 ±0.30 ±0.31 ±0.35
>8.0~10.0 ±0.32 ±0.33 ±0.34 ±0.35
>10.0~12.0 ±0.35 ±0.36 ±0.37 ±0.43

nominal thickness(mm)

 

minus deviation (mm) The thickness deviation with following width (mm)
> 1000 ~1200 > 1200 ~1500 > 1500 ~1700 > 1700 ~1800 > 1800 ~2000 > 2000 ~2300 > 2300 ~2500 > 2500 ~2600 2600 ~2800 > 2800 ~3000
>12~25 -0.8 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.8 +1.0 +1.1 +1.2
>25~30 -0.9 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.1 +1.2
>30~34 -1.0 +0.2 +0.3 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.2 +1.3
>34~40 -1.1 +0.3 +0.4 +0.5 +0.6 +0.7 +0.9 +1.0 +1.1 +1.3 +1.4
>40~45 -1.2 +0.4 +0.5 +0.6 +0.7 +0.8 +1.0 +1.1 +1.2 +1.4 +1.5


Kindly send email to [email protected], The professional team will support your work as one-to-one.
At last, Welcome to Visit our mill for long coopeation and checking steel quality in any time.

Henan BEBON international co.,ltd located in zhengzhou ,henan province of china. Since it was established in 2008, Henan BEBON has earned an outstanding reputation for its profession in exporting shipbuilding steel. About the products, we are mainly specialized in steel products for shipbuilding which have been products for shipbuilding which have been approved by some authoritative classification societies,likeLR,BV,ABS,DNV,GL and so on.


If you can`t find what you wanted ,Please send Email to [email protected] ,we will reply you ASAP!!Online Chat

  • p235gh Boiler and Pressure Vessel Steel Plate

    P235GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P235GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • p265gh Boiler and Pressure Vessel Steel Plate

    P265GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P265GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • p355gh Boiler and Pressure Vessel Steel Plate

    P355GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P355GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

    Read more
  • s235jr Boiler and Pressure Vessel Steel Plate

    S235JR is a kind of low alloy steel under EN10025 standard. The impact test is at room temperature .S235JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s275j2 Boiler and Pressure Vessel Steel Plate

    S235JR is a kind of low alloy steel under EN10025 standard. The impact test is at room temperature .S235JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s355jr Boiler and Pressure Vessel Steel Plate

    S355JR is a kind of low alloy steel under EN10025 standard. S355JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s235j0W Weather Resistant Steel Plate

    S235J0W is a kind of low alloy steel under EN10025 standard. The impact test temperature is 0 ℃.S235J0W steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s235j2W Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S235J2W. EN10025 S235J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy velue should be carried out in accordance with EN 10025-1.If agreed at the time of the order products of qualities J2 or K2 shall comply with one of the requirements of EN10164.

    Read more
  • s355j0W Weather Resistant Steel Plate

    S355J0W is a kind of low alloy steel under EN10025 standard. The impact test temperature is 0 ℃. S355J0W steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

    Read more
  • s355j2W Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S355J2W. EN10025 S355J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy value should be carried out in accordance with EN 10025-1.

    Read more
  • a558a Weather Resistant Steel Plate

    A588GrA general 8mm ~ 200mm thick, A588 series high weathering steel bridge structures including A588GrA, A588GrB so on. Such steel by Cu, P, Cr, Ni and other alloying the metal substrate surface to form a protective layer, which has a high resistance to atmospheric corrosion.

    Read more
  • a588b Weather Resistant Steel Plate

    S235 material can be supplied in S275JR, S275J0, S355J2W. EN10025 S355J2W can be used in lower temperature. The impact test is under -20 degree. The verification of the impact energy value should be carried out in accordance with EN 10025-1.

    Read more

If you can`t find what you wanted ,Please send Email to [email protected] ,we will reply you ASAP!!Online Chat